Laboratory Equipments

Features :

Made of Stainless Steel

Sizes fit most cassettes.

Superior thermal exchange.

Applications :

These molds are for all applications in specimen embedding with all styles of Embedding Rings and Cassettes. Manufactured from high-quality stainless steel for optimal thermal conductivity, the molds have a highly polished surface for easy paraffin block removal. Well corners are rounded for optimal paraffin ribboning.

These High Quality Tissue Processing Cassettes in white colour made from quality material are provided by us. This Products are highly appreciated by our clients because of their less price & long life.

Cassettes keep specimen safely submerged in liquid. Efficient flow-through slots. Snap-latch and hinge-lock design prevent early separation of base and lid and allows for one hand operation. Large labeling area on two sides of cassette. Anterior writing area is at 35° angle

Category : Health Medicine

We are instrumental in offering our clients an array of L-Molds: Embedding Molds. These are used for holding the wax block for taking sections on microtome. These offered range is stringently checked on varied parameters to ensure these products are durable and deliver optimum results.

 

Features:

• Available in varied sizes such as:

1. 37 × 25 × 15 mm pair
2. 50 × 25 × 15 mm pair
3. 75 × 30 × 19 mm pair

• Category: Health Medicine

_{R.K Tissue Cassettes Base Molds}

With the help of our efficient workforce, we are capable of providing our clients with a comprehensive range of Stainless Steel Base Molds. These steel base molds are particularly used with embedding cassettes. Embedding Cassettes are available in all sizes and made up of reusable and stainless steel

Size: 7 x 7 x 5 mm

Size: 15 x 15 x 5 mm

Size: 24 x 24 x 5 mm

Size: 30 x 24 x 5 mm

Size: 37 x 24 x 5 mm

 

Size: 7 x 7 x 6 mm

Size: 15 x 15 x 6 mm

Size: 24 x 24 x 6 mm

Size: 30 x 24 x 6 mm

Size: 37 x 24 x 6 mm

 

Size: 7 x 7 x 7 mm

Size: 15 x 15 x 7 mm

Size: 24 x 24 x 7 mm

Size: 30 x 24 x 7 mm

Size: 37 x 24 x 7 mm

R. K. Scientific Instrument Center has in its store large variety of Processing Cassettes made from quality material. These Products are available variety of colors & shapes.

R.K. PARAFFIN DISPENSER DIGITAL TEMPERATURE CONTROLLER

This has been made by latest technology and new design. Embalding can be done in this very quickly. On the top of this a S/S tank with double valve has been made for wax; the cap of which is 4 Ltr. There are heating elements inside with cap 1000 wt. which has been made by Kanthal wire. There is a Kok from inside to outside, with the help of which wax come out from inside. On the outside with the help of which wax come out from inside. On the outside of Kok heating elements have been fitted. There is a switch on the control panel which is switched on & off for only 7 minutes. After this wax began to come out from Kok and switched off a tank (1/2 Ltr.) of wax has been fitted on the working table. There is a control panel for controlling all these operations. Digital Temperature controller shows 80°C Temperature of main tank. There is a switch down side which makes digital on & off. Sun week fitted on control panel controls tank of wax on the working table at 80°C.

 

Features :-

• This Dispenser is rust proof.
• Suitable to work on 220 V 2 Amp. Single phase 50 Hz AC supply.
• This is measured by 23x13x12.
• The temperature of Dispenser can be done negative & positive (-, +).

R.K. Knife Holder base

 

Knife holder base, without lateral displacement,
black & white -colored including locking lever

Knife holder  for high profile disposable blades
(80 x 8 x 0.25 mm) Quick release clamping system.
Clearance angle adjustment.
Movable permanent knife guard.

Pressure plate S, 22 °, for high profile blades

M/s steel pressure plate
Tungsten Carbide back plate

R.K. Incubator

Construction: - Incubator are sturdy, with double walled’ construction with complete inner chamber made of anodized aluminum or highly polished stainless steel. Outer chamber is made of mild steel sheet, finished with powder coated paint. 75mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber fabricated with ribs for adjusting shelves to convenient height. Supplied with  2 removable shelves. SHELVES are made of fully anodized aluminum sheet as per chamber. Door is insulate & fitted with heavy hinges. Door has double glass window which facilitate inspection of samples without opening the door.

Heating Element:-heating elements are made of high grade nickel/chrome plate nichrome wire witch are put inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.

Temperature Control:- temperature is controlled by imported capillary type thermostat form ambient to 100°C. Temperature control knob is graduated in centigrade degrees degrees after actually observing the temperature in steady state. An L-shaped prismatic glass thermometer is fitted on top of the incubator for reading the chamber temperature.

Ventilation:-Air ventilators are provided on both sides at top to flue away any gas or fumes.

Control Panel: - the equipment is provided with a panel having a thermostat control knob, ON/OFF switch and two pilot lamps.

Power Requirement:-Supplied with coed and plug suitable to operate on 220V single phase, 50 Hz, AC supply.

 

 

Size of inner chamber: 

W x H x D
355 x 355 x 355mm –Stainless Steel
355 x 355 x 355mm –Aluminum

Category: Health Medicine

Slide Tray (Aluminum)

Made Out Of 20 Cm Plastic Sheet By Dia-Press System And Is Richly Polished . For 20 Slides Of 75x25 Mm In Flat Position.